Ratchet Wrenches
Ratchet Wrenches
  • 223
  • 7 454 401
Forged 4.6L 2V Engine Build Price Breakdown
The #1 asked question I receive is how much did we spend to build a forged long block for the Turbo'd New Edge Mustang? In today's video, I break it down part by part and go over how much we spent and.... it was A LOT OF MONEY! Most of the parts we purchased were through Cody Queensberry, owner of StraightLineSolutions.
DISCLOSURE: We may earn a commission when you use one of our links to make a purchase.
Shop Liquid I.V. and get 20% OFF & FREE SHIPPING. Use this link here or code "RATCHET_WRENCHES" at checkout. glnk.io/8ln02/ratchet_wrenches
Check Us Out ⬇️
MERCH: teespring.com/stores/ratchet-wrenches
INSTAGRAM: ratchet_wrenches?hl=en
FACEBOOK: ratchetwrenches/
TIKTOK: vm.tiktok.com/okaG3r
What we use to film:
Camera: amzn.to/3ScoGVU
GoPro: amzn.to/372F9mn
Vlog Case: amzn.to/2OxYyVP
Mic Adapter: amzn.to/2v70e1x
Mic: amzn.to/2udZfNa
Tripod: amzn.to/385Nxmq
Drone: amzn.to/34PJonv
Non Copyright music: www.epidemicsound.com/referral/re6pkb/
Переглядів: 5 825

Відео

First Drive in the Turbo 2v 2.0!
Переглядів 4,7 тис.5 місяців тому
The time has FINALLY come! The Turbo 2V 2.0 officially hit the road tuned! (partially)... we get into what else needs to be done to safely get into boost and make some serious power! DISCLOSURE: We may earn a commission when you use one of our links to make a purchase. For all your OEM & Aftermarket Volkswagen/Audi Parts: www.ecstuning.com/?ranMID=43304&ranEAID=PiRFMjRO36s&ranSiteID=PiRFMjRO36s...
Goodbye Austin.
Переглядів 2,8 тис.6 місяців тому
This was the hardest video to edit. Austin decided to part ways with Ratchet Wrenches and it'll never be the same without ya buddy. Thank you for all the incredible memories on the channel, the fans and I will never forget you and your education, laughs and awesome videos we created over the past 5 years. DISCLOSURE: We may earn a commission when you use one of our links to make a purchase. For...
Here's Where The Turbo 2v Has Been and Why
Переглядів 4,2 тис.7 місяців тому
This is a VERY long overdue video and update for the freshly rebuilt Turbo 2v Mustang! In this video, everything is explained as to why it's been 3 months since you've all seen this car! Some awesome content should be coming very soon once it is tuned! DISCLOSURE: We may earn a commission when you use one of our links to make a purchase. Shop Liquid I.V. and get 20% OFF & FREE SHIPPING. Use thi...
Revealing Our Big Turbo 500 HP Audi S3!
Переглядів 18 тис.10 місяців тому
Today's the day you guys have been asking and waiting for! We're finally able to show you guys the big turbo s3 build! After many many revisions this Vortex XL Audi S3 is terrorizing the streets! We had a ton of fun filming this video and we hope you guys enjoy and please leave us a thumbs up and subscribe for more of this beast. DISCLOSURE: We may earn a commission when you use one of our link...
Installing our FRESHLY BUILT 2V Mustang Engine!
Переглядів 11 тис.10 місяців тому
In today's video we are finally able to provide you guys with the install of our 1400 capable turbo 2v motor! so sit back and enjoy as we know this is what you guys have been waiting for! For all your mustang parts and needs visit straight-line-solutions.com/ the mustang channel sponsor. DISCLOSURE: We may earn a commission when you use one of our links to make a purchase. Shop Liquid I.V. and ...
Painting Our NewEdge Mustang Engine Bay on a Budget!
Переглядів 1,5 тис.11 місяців тому
In today's video we finally got around to painting our engine bay for the On3 Turbo 2v Mustang! this is one of the last things we had to do before finally installing the built engine and getting this 2v back on the streets! We are not professional painters and i'm sure this shows but sit back and engine as we put our ratchet spin on making this engine bay pop! Mustang Sponsor: straight-line-sol...
Audi S3 EQT Vortex XL Turbo Install Part 2 | Installing The BIG Turbo
Переглядів 7 тис.Рік тому
Today's the day we finally installed the EQT Vortex XL in the 2016 Audi S3! This car is going to be an absolute animal. Here's an in depth tutorial on how to install it so sit back and enjoy! DISCLOSURE: We may earn a commission when you use one of our links to make a purchase. Parts: Turbo: eqtuning.com Coolant adapter: click.linksynergy.com/deeplink?id=PiRFMjRO36s&mid=43304&murl=https://www.e...
The Turbo 2v is BACK! | BIG Updates!
Переглядів 2,1 тис.Рік тому
We FINALLY have good news and updates for you guys about the mustang! It's been a long time of patiently waiting but finally we can begin the rebuild! DISCLOSURE: We may earn a commission when you use one of our links to make a purchase. Shop Liquid I.V. and get 20% OFF & FREE SHIPPING. Use this link here or code "RATCHET_WRENCHES" at checkout. glnk.io/8ln02/ratchet_wrenches Check Us Out ⬇️ MER...
Audi S3 EQT Vortex XL Turbo Install Part 1 | LPFP, MPI & Injectors
Переглядів 5 тис.Рік тому
Hey guys were super stoked to be able to install the EQT Vortex XL on our 2016 Audi S3, and in today's video we install the EQT Brushless LPFP, the Precision Raceworks MPI kit/injectors, and of course the Euro Intake Manifold! This is part 1 of the series and the next video will be the install of the turbo itself so stay tuned for that. Turbo and Parts: eqtuning.com/ DISCLOSURE: We may earn a c...
Stage 2 Audi S3 Drag Racing 1/4 Mile Times!
Переглядів 4,9 тис.Рік тому
Stage 2 Audi S3 Drag Racing 1/4 Mile Times!
How To Fix Your MKV GTI Headliner FOR GOOD... Under $100!
Переглядів 40 тис.Рік тому
How To Fix Your MKV GTI Headliner FOR GOOD... Under $100!
MKV GTI ECS 3" Cat-back Exhaust | Install, Revs & Fly By's !!!
Переглядів 35 тис.Рік тому
MKV GTI ECS 3" Cat-back Exhaust | Install, Revs & Fly By's !!!
Wire Tucking Our Turbo NewEdge Mustang!
Переглядів 5 тис.Рік тому
Wire Tucking Our Turbo NewEdge Mustang!
Here's why the project MKV GTI has been hidden from you guys...
Переглядів 7 тис.Рік тому
Here's why the project MKV GTI has been hidden from you guys...
Full Cost Breakdown on my 400HP Audi S3!
Переглядів 27 тис.Рік тому
Full Cost Breakdown on my 400HP Audi S3!
Turbo 2v Engine and Parts Update!!!
Переглядів 4 тис.Рік тому
Turbo 2v Engine and Parts Update!!!
How To Make Loud Intake Sounds With A MK5 GTI!
Переглядів 32 тис.Рік тому
How To Make Loud Intake Sounds With A MK5 GTI!
How to Install a Catch Can on your Audi S3!
Переглядів 5 тис.Рік тому
How to Install a Catch Can on your Audi S3!
Lowering our Mk5 GTI on Coilovers!
Переглядів 20 тис.Рік тому
Lowering our Mk5 GTI on Coilovers!
How To Disassemble a 4.6L SOHC 2V Mustang Short Block
Переглядів 8 тис.Рік тому
How To Disassemble a 4.6L SOHC 2V Mustang Short Block
Revealing Our New Project Car | MKV GTI
Переглядів 1,7 тис.Рік тому
Revealing Our New Project Car | MKV GTI
We Pulled Our 4.6L 2v Mustang Engine and Tore It Down!
Переглядів 35 тис.Рік тому
We Pulled Our 4.6L 2v Mustang Engine and Tore It Down!
Our Turbo Mustang Finally Broke
Переглядів 3,4 тис.Рік тому
Our Turbo Mustang Finally Broke
C2 Carters Customs Aero Parts on Our Turbo NewEdge! SUPER AGGRESSIVE!
Переглядів 4,2 тис.Рік тому
C2 Carters Customs Aero Parts on Our Turbo NewEdge! SUPER AGGRESSIVE!
On3Performance Turbo Kit for 1996-04 Mustang GT | 6 Month Review
Переглядів 105 тис.Рік тому
On3Performance Turbo Kit for 1996-04 Mustang GT | 6 Month Review
Stage 2 Tuned Audi S3 vs Camaro 1LE Races!
Переглядів 12 тис.Рік тому
Stage 2 Tuned Audi S3 vs Camaro 1LE Races!
How to Install a Intercooler on a Audi A3/S3 | DONT PAY A SHOP TO DO IT!
Переглядів 28 тис.Рік тому
How to Install a Intercooler on a Audi A3/S3 | DONT PAY A SHOP TO DO IT!
Top 5 Must Do Mods For Your Audi A3/S3 | HUGE Changes
Переглядів 103 тис.Рік тому
Top 5 Must Do Mods For Your Audi A3/S3 | HUGE Changes
Ripping Our Turbo'd NewEdge + Dragy Launches!
Переглядів 2,5 тис.Рік тому
Ripping Our Turbo'd NewEdge Dragy Launches!

КОМЕНТАРІ

  • @markowens64-uh7bc
    @markowens64-uh7bc 6 годин тому

    what happened to dipstick tube install? One pic it isn't and the next it is and you were talking about the motor mount

    • @RatchetWrenches
      @RatchetWrenches 2 години тому

      You just have to route the flexible dipstick through the headers or around them whatever works for your set up

  • @kylensloyer
    @kylensloyer 20 годин тому

    Do you still have this car? If so hows everything holding up

  • @yungratpoison
    @yungratpoison 21 годину тому

    i have some blacked out control units on my obdeleve pro version, specifically display as im trying to enable my green menu and the one click apps say unavailable, car im using is 2012 audi Q5

  • @jwalk40004
    @jwalk40004 День тому

    The corvette seems to be backing off

    • @RatchetWrenches
      @RatchetWrenches 2 години тому

      Driver wasn't experienced driving stick or familar with the car

  • @duartefreitas6952
    @duartefreitas6952 День тому

    I’ve installed in my car. The thing is when I remove the oil cap ther it’s no negative pressure, the oil cap wants to jump off. It’s that normal ? I’m afraid I’m creating way to much crankcase pressure

  • @alcan6885
    @alcan6885 2 дні тому

    Single piston would fit?

  • @terryhodges5850
    @terryhodges5850 3 дні тому

    Had a terminator A few years ago drove it for five years regularly put about 30,000 miles on it and sold it $6000 more than I paid for it 💥 those mustangs hold value

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      That's insane. Yeah the terminators hold value very very well and about a year or 2 ago was the absolute best time to sell one they were going for so much money. They've come down a bit in value now I believe

  • @bengordon7635
    @bengordon7635 3 дні тому

    seen an awesome 2011 mustang gt on face book market place with a rebuilt title .. runs perfectly for $4800 and all kinds between 7 and 8k hmmm the swap is not worth it anymore

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      Everyone's got their own opinion. I personally like the sound of a 2v way more than the 5.0's. And with a built bottom end I'm capable of making 1000whp if I wanted to with the right supporting mods. And my title isn't rebuilt haha

  • @chuckbaye478
    @chuckbaye478 3 дні тому

    You said you wish the sound was better. On my 09 I have a 200 cell cat with AWE performance exhaust I removed the resonator and mine sounds like a V8 maybe it's the fact you have a sideways engine versus the longitude engine. Cause mine sounds awesome. I have alot of ppl that think I have a V8 cause I took off all my badging on the back so nobody knows what it its

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      That could be a contributing factor for sure. I bet it sounds nasty! Keeps everyone on their toes, not knowing what it actually is.

  • @chuckbaye478
    @chuckbaye478 3 дні тому

    I'm building a 09 Audi A4 2.0t with Norstrum injectors. Upgraded fuel pump, 83.5mm JE racing pistons, CTS big boss 600 turbo, Ward Performance tune and I'm switching to a ZF 8HP transmission putting out 28lbs of boost. I can't wait for the turbo to arrive. I'm gonna putting out above 600hp. I was gonna ask did you dyno it??

  • @sanjitsubedi3235
    @sanjitsubedi3235 3 дні тому

    All the side pillars screw gone downinside

  • @jorgereyes3241
    @jorgereyes3241 3 дні тому

    man my gli was a pain in the ass to take out 💀🤦‍♂️ never again i rather sell the fucjing car lmfao

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      It's definitely not an "easy job" that's for sure! We've been tempted to sell cars on jobs like this 😂

    • @jorgereyes3241
      @jorgereyes3241 3 дні тому

      @@RatchetWrenches bro took me 5 hours to take it out 😂😂 i had ordered the parts so i said fuck it i will keeep going tomorrow

  • @NeoTselaesele
    @NeoTselaesele 4 дні тому

    I dont know if you're going to see this but do you have to disconnect the battery

  • @bullet2096
    @bullet2096 5 днів тому

    Doing this swap now. Unfortunately 950.61001 brake hoses are the wrong thread size for my GT hard brake lines.

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      Good luck with the swap! You're gonna love the upgraded braking ability now. And ahh that's unfortunate!

    • @bullet2096
      @bullet2096 3 дні тому

      @@RatchetWrenches There is a right and left side. Almost finished. Keep making videos your channel is helpful.

  • @cloudrhezii
    @cloudrhezii 5 днів тому

    How’s the stopping power with this setup ? Planning to do the exact same . And thank you for the lines and other info you provided much appreciated dude

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      Anytime! And it's NOTICEABLY better. You really do feel a big difference IMO. I love the new brakes and they look 10x better too!

  • @half_r_mk5
    @half_r_mk5 5 днів тому

    Amazing DIY, this helps for sure. I have an '08 MK5 GTI and so far it is still mint in the interior, but I know one day this will come handy as the car ages further. I'm the first owner of the car as well and so far the car has been maintained well. Thanks for this video. This helps a lot.

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      That's awesome being the first owner and it being in MINT condition! Yes it'll come one day 😂 hopefully not anytime soon though

  • @ralphsnightmare103
    @ralphsnightmare103 7 днів тому

    what gas you running?

  • @joshuahiggins5313
    @joshuahiggins5313 7 днів тому

    I just got long tubes catted X-pipe and I have flomasters already on the car. May think about borla-s type I do love them but think the cams really help with the sound.

    • @RatchetWrenches
      @RatchetWrenches 5 днів тому

      Nice! Yeah upgraded cams definitely wake the car up but exhaust flow helps a ton to make the car sound really good. There's a fine line between sounding good and being loud vs raspy and too loud though. Gotta find the in-between

  • @MuNky1022
    @MuNky1022 8 днів тому

    Rear fog lights are pretty common, if not standard even in cheaper economic cars. They help a lot to be visible with the spray/mist clouds on a busy highway when it rains. Always remember - lights aren't always about you seeing, but being able to be seen by others (which is why people who don't turn on their lights at dusk triggers the hell out of me).

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      Very true! It's all about being seen at night by others. Oh yeah the people who don't turn on their lights at night really are idiots and grind my gears!

  • @Bertoes87
    @Bertoes87 9 днів тому

    Great video thx! I wonder if its possible to add also the addblue level on the mmi screen?

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      Thanks! And I'm not sure off the top of my head if that's possible or not

  • @rickcharles9778
    @rickcharles9778 9 днів тому

    Does anyone know if charger scat pack breaks will fit???

    • @RatchetWrenches
      @RatchetWrenches 3 дні тому

      I am not sure if they will. Possibly a Facebook forum could help you out

  • @jasonurban3597
    @jasonurban3597 9 днів тому

    It's just absolutely f****** amazes me that people could do this type of s*** just a freaking knowledge bro you guys are amazing man wow

  • @tylerbarkley4192
    @tylerbarkley4192 9 днів тому

    Idk if you will see this but im having car issues with my 2014 vw jetta turbo and it keeps giving me cylinder 3 misfire and the spark plug and coil pack were both replaced 9 mknths ago and still look great....but oreillys also had a code that said de carbon system...so do you thjnk this is what i should do? It runs terible and check engine light js on and my traction control light and my tire lressure sensor light as well.. oreillys told me to do chemtool cleaner to clean it all out but i feel like it wont do much help plz

  • @jasonurban3597
    @jasonurban3597 10 днів тому

    I just bought a 2000 saleen 281 it's not supercharged one but I'd like to do a turbo and just seems like this might be the best fit if you get a chance let me know what you think my car actually only has $12,000 mi on it I got an amazing deal with some beautiful shape

  • @CarXrsa
    @CarXrsa 10 днів тому

    I just Picked up the A3 today , I thought the Electronic handbrake was acting up too 😅 all it wanted was me to put my seatbelt on and it will drive off without the drivers seat belt on u won’t be able to drive off try it that’s why u were able to drive off the time u tried to launch it ur seatbelt was on . Thanks For the other tips I will check them out 🤘🏽🔥🔥🔥great content

  • @itsmebi---
    @itsmebi--- 11 днів тому

    Your video is better than fcpeuro. Thank you for this! I'll be doing mine this weekend on my a3 with the same kit. I've always used power stop on all my vehicles. Their brakes are awesome and you can't beat the price

  • @SynergyGuitars
    @SynergyGuitars 12 днів тому

    see if u can get rolling anti lag ;)

  • @genericdude6551
    @genericdude6551 13 днів тому

    I'd be happy if I got 450-500 HP from my SN95. If I was going to race it I'd go to these extremes for 1000+ HP.

    • @RatchetWrenches
      @RatchetWrenches 12 днів тому

      That power range is plenty to have fun on the street! I overbuilt the engine and fuel system in case I ever wanna get really serious with the build!

  • @genericdude6551
    @genericdude6551 13 днів тому

    Wow. That's a lot of work. I doubt that I'd do this work myself.

    • @RatchetWrenches
      @RatchetWrenches 12 днів тому

      It's definitely a good amount of work but it's totally doable with the right mindset and set of tools!

  • @MrAlternation
    @MrAlternation 14 днів тому

    11:37

  • @paulhogden7454
    @paulhogden7454 14 днів тому

    I think you might have missed the last bit which is - once you’ve run the gearbox to temperature you open the drain plug and open until you get a small steady stream. Then close it. Otherwise you might have overfilled. But good video otherwise.

  • @eddieg-rider8939
    @eddieg-rider8939 14 днів тому

    You need dealer transmission fluid and blue radiator fluid

    • @RatchetWrenches
      @RatchetWrenches 14 днів тому

      That's definitely the recommended fluid yes but the owner here never had any issues with what he used

  • @genericdude6551
    @genericdude6551 15 днів тому

    It seems that a supercharger would be easier to install and it seems it would cost about the same for the essentials. JMO. One could spend a lot of bucks upgrading the SN95 Mustangs but it's nice to know we have options other than buying a new car.

    • @RatchetWrenches
      @RatchetWrenches 14 днів тому

      Supercharger would be much easier for sure! And depends what supercharger brand you use but for example a top mount roots style blower like whipple is going to be more expensive than a turbo set up. Either way yeah there's plenty of options for boost!

  • @kenknight4560
    @kenknight4560 17 днів тому

    So what most Oil Change Monkeys do, even at Ford, is to only remove the front two bolts on belly pan. Then they pry down pan bending it at back two bolts locations. This is what destroys those $200 pans. The back mounting area on belly pan is weak from factory. I strengthened this area with fiberglass cloth and resin. If you take it to a shop watch the Monkeys work and make sure they remove belly pan.

  • @CR15PY1
    @CR15PY1 17 днів тому

    My leak isn’t too bad but I need to swap my oil filter housing too I have the parts

    • @CR15PY1
      @CR15PY1 14 днів тому

      Im glad it wasn’t anything much worse. The title made me think it broke down internally

    • @RatchetWrenches
      @RatchetWrenches 14 днів тому

      Yeah ours was really bad hahaha but yep no the internals were still good!!

    • @CR15PY1
      @CR15PY1 14 днів тому

      @@RatchetWrenches as they should!

  • @tuffgang3382
    @tuffgang3382 18 днів тому

    Did the exhaust add any horsepower?

    • @RatchetWrenches
      @RatchetWrenches 17 днів тому

      I'm not sure I've never had the truck on a dyno or tuned

  • @TheJrt1983
    @TheJrt1983 18 днів тому

    Stupid question but I have a set of 2020 GT 4 piston brake calipers and I was wondering if anyone knew what it would consist of putting them on my 99 GT?

    • @RatchetWrenches
      @RatchetWrenches 14 днів тому

      That's a good question I actually have no idea! I'm sure some FB groups could give you an answer

    • @cloudrhezii
      @cloudrhezii 5 днів тому

      Just went through this headache . A guy used to make a kit for it to work (went out of business) but the spacers needed to even do it makes your wheels poke . I just sold my s550 calipers to just run the ats brembos they have the kit and the offset isn’t destroyed as much

  • @ricosmith7216
    @ricosmith7216 18 днів тому

    Nice !!!!

  • @fakenews4734
    @fakenews4734 19 днів тому

    What is this stupid shit of putting your hand on top of the steering wheel like VIn Diesel? Zero control and stability, almost like it's a dumb idea.

  • @RidinDirtyRollinBurnouts
    @RidinDirtyRollinBurnouts 19 днів тому

    If you can justify its cost, the MegaSquirt pro for our cars allows you to switch beteeen pump and e85 on the fly, no draining. Itll detect the ethanol and adjust the tune accordingly. Great investment if you want an e85 capable car that can auto-switch on the fly

    • @RatchetWrenches
      @RatchetWrenches 18 днів тому

      I'm definitely in the market for a standalone ECU in the near future! I'm gonna try straight E85 for the summer and see how it goes and then depending on that I may upgrade to a Megasquirt or Holley

  • @RidinDirtyRollinBurnouts
    @RidinDirtyRollinBurnouts 19 днів тому

    Its crazy how modular motors were a big force to contend with in the 2000s and now people have amnesia or are too young to remember lol. Thats exactly why i went boosted mod motor instead of coyote/ls everything

    • @RatchetWrenches
      @RatchetWrenches 18 днів тому

      Yeah seriously times have changed drastically! I still love the 2v and 4v engines and would much rather build one instead of doing the overdone coyote builds like you said. They just sound better too IMO

    • @midnight347
      @midnight347 9 днів тому

      They're too young to remember many times and they just repeat what others say with no first hand knowledge.

    • @midnight347
      @midnight347 9 днів тому

      Boosted mod motors can put in work ecsp for the money spent. Most newer coyote cars plus mods cost way more than one of these properly built with forced induction and everything needed to make big reliable power. What I think is funny is how many ppl think ol 4.6 can't do more than 400 wheel like no matter what. Ppl don't even understand what a built short block is anymor

    • @RidinDirtyRollinBurnouts
      @RidinDirtyRollinBurnouts 9 днів тому

      @midnight347 short blocks are getting harder and harder to find for these cars. Lots of them are on backorder, likely due to a shortage of suitable cores. If mine ever leaves the chat, I'll have to go coyote route :(

    • @jeffreyabbey9592
      @jeffreyabbey9592 4 дні тому

      Great build. Great breakdown

  • @trashgaming6570
    @trashgaming6570 19 днів тому

    Okay now do a cold start with absolutely no exhaust system at all

    • @RatchetWrenches
      @RatchetWrenches 18 днів тому

      😂 yeah back then I thought this exhaust was loud but now I realize there's much much louder out there

    • @trashgaming6570
      @trashgaming6570 18 днів тому

      @@RatchetWrenches 😂😂 it sounds great brother. I don’t even have one. I’m just watching these old videos while I save up for one.

  • @katekate7579
    @katekate7579 19 днів тому

    Nice video. Just got my truck box, this helps!

  • @mpharr2
    @mpharr2 21 день тому

    What Grit Sandpaper ?

    • @RatchetWrenches
      @RatchetWrenches 18 днів тому

      I forget it's been so long but obviously start off non abrasive and work your way down if need be depending on your valve covers condition!

  • @ardennielsen3761
    @ardennielsen3761 21 день тому

    lean knock

  • @thomasquinn405
    @thomasquinn405 22 дні тому

    should of just bought Bilstein 531 adjustable struts to start

  • @f--wm2zl
    @f--wm2zl 22 дні тому

    What are the measurements for the sheet

    • @RatchetWrenches
      @RatchetWrenches 21 день тому

      If you click on the link in the description it'll bring you to the exact fabric we bought!

  • @matthewvanderfin3361
    @matthewvanderfin3361 23 дні тому

    10k is about what I expected, been looking and thinking about what I want to do with my own 2v.

    • @RatchetWrenches
      @RatchetWrenches 21 день тому

      Yep I've heard some feedback that $10k isn't bad but obviously you can do it cheaper. I'm just excited now I don't have to worry about the bottom end anymore

  • @kevintaylor31
    @kevintaylor31 24 дні тому

    @RatchetWrencehes Not sure if the mirror drop function would be there for a golf without memory seats. Pretty sure you need to have them.

  • @shesqueeled
    @shesqueeled 24 дні тому

    sounds like you got some shit knocking in the engine bud